Results 1 to 3 of 3

Thread: code 43 car wont start

  1. #1
    Fuel Injected!
    Join Date
    Mar 2016
    Posts
    22

    code 43 car wont start

    i had this all workig with the 1995 pcm 16197427 parked car now wont start have code 43 checked wire had burned on header replace knock sensor with white connector for manual , should I have used the black one for auto trannys ???? and wire to pcm B15 place on lap top still showing code 43 & wont start ????? did I short out the pcm ?????? help thoughts would be helpful thanks
    Last edited by corvetteracing; 01-25-2018 at 10:47 PM.

  2. #2
    Fuel Injected!
    Join Date
    Oct 2013
    Posts
    1,022
    A knock sensor issue won't cause a no start. The PCM is fairly resistant to damage and shorting the knock wire out won't hurt it anyways. Something else is causing your no start.

    A better place to ask would have been in the "GM EFI Systems".

  3. #3
    Fuel Injected!
    Join Date
    Mar 2016
    Posts
    22
    all fixed, installed new distributor and correct KS6 4.ohm knock sensor running good !

Similar Threads

  1. new guy with a cammed tbi that wont run right!
    By cleansquare in forum GM EFI Systems
    Replies: 10
    Last Post: 09-19-2023, 02:10 AM
  2. Why wont the blm's line out???
    By buddrow in forum GM EFI Systems
    Replies: 4
    Last Post: 04-27-2014, 05:58 AM
  3. injectors wont trigger from ecm ?
    By Tyree in forum GM EFI Systems
    Replies: 22
    Last Post: 01-08-2014, 10:55 AM
  4. Lean cruise AFR ratios wont save?
    By BrandonA. in forum GM EFI Systems
    Replies: 18
    Last Post: 10-31-2013, 04:20 AM
  5. Replies: 6
    Last Post: 10-11-2013, 12:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •