It does not work, I have both.
I tried both ways: AVT cable with Jet DST and Jet DST cable with Winflash, no avail.
It does not work, I have both.
I tried both ways: AVT cable with Jet DST and Jet DST cable with Winflash, no avail.
Ok but if I were to get the Jet 14007 cable, that is supposed to work with can bus. Can I save in bin format with test mode with DST? Or can someone convert from jst to bin?
It's been a while since I used test mode with JET, I don't know if the current version still has the mode available. If it does yes you can save as BIN.
I can convert the JST to BIN, however some information is lost in the process since JST files have no VIN nor traceability data, so that data is blank in the converted BIN.
What are you attempting to do?
It will enter test mode with CTRL T, but the 14005 won't communicate on the CAN BUS. I just want the bin files from an E92 ECM, no need to flash at this point. Just want to dig through the bin. Sounds like if the DST combined with the 14007 JET for CAN BUS, saves in bin format I'll be all set.
Bad idea.
Jet uses a license every time you read a PCM. A new interface comes with 4 licenses, they will be depleted quickly.
You may want to look for a different solution.
Believe me, I have been looking for a solution to this high and low. I am all ears to a hardware and software that will allow bin extraction from the newer CAN BUS ECM's.
Bookmarks