Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 7 of 7

Thread: JET DST with AVT-852 cable

  1. #1
    Carb and Points!
    Join Date
    Jan 2018
    Age
    40
    Posts
    4

    JET DST with AVT-852 cable

    Does anybody know if the AVT-852 cable will work out of the box with the JET DST software? Just need to put it in test mode to read out the bin file. CAN communications. for 2014-16 GM E92 ECM. The 14005 Jet DST will not work with CAN BUS, but the 14007 DST will, and it is pricey. Not looking to flash it, just extract the bin file.

  2. #2
    It does not work, I have both.
    I tried both ways: AVT cable with Jet DST and Jet DST cable with Winflash, no avail.

  3. #3
    Carb and Points!
    Join Date
    Jan 2018
    Age
    40
    Posts
    4
    Ok but if I were to get the Jet 14007 cable, that is supposed to work with can bus. Can I save in bin format with test mode with DST? Or can someone convert from jst to bin?

  4. #4
    It's been a while since I used test mode with JET, I don't know if the current version still has the mode available. If it does yes you can save as BIN.
    I can convert the JST to BIN, however some information is lost in the process since JST files have no VIN nor traceability data, so that data is blank in the converted BIN.
    What are you attempting to do?

  5. #5
    Carb and Points!
    Join Date
    Jan 2018
    Age
    40
    Posts
    4
    It will enter test mode with CTRL T, but the 14005 won't communicate on the CAN BUS. I just want the bin files from an E92 ECM, no need to flash at this point. Just want to dig through the bin. Sounds like if the DST combined with the 14007 JET for CAN BUS, saves in bin format I'll be all set.

  6. #6
    Bad idea.
    Jet uses a license every time you read a PCM. A new interface comes with 4 licenses, they will be depleted quickly.
    You may want to look for a different solution.

  7. #7
    Carb and Points!
    Join Date
    Jan 2018
    Age
    40
    Posts
    4
    Believe me, I have been looking for a solution to this high and low. I am all ears to a hardware and software that will allow bin extraction from the newer CAN BUS ECM's.

Similar Threads

  1. WTB : AVT cable
    By quadstar87 in forum Buy - Sell - Trade - Wanted
    Replies: 2
    Last Post: 08-07-2016, 02:14 PM
  2. Has anyone ever used this cable?
    By DOCBAWRENCHTURNER in forum GM EFI Systems
    Replies: 4
    Last Post: 01-16-2015, 12:01 PM
  3. ALL cable
    By Demonknight86 in forum GM EFI Systems
    Replies: 3
    Last Post: 01-08-2015, 09:58 AM
  4. WTB AVT-852 cable
    By mightymonte in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 12-01-2014, 07:35 PM
  5. Check out this cable....
    By BurgerWorld in forum GM EFI Systems
    Replies: 5
    Last Post: 09-09-2013, 07:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •