Newbie question - GM bin file for 4l80e?

[dave w]

Thanks for the replies guys! That link looks helpful. How can i find the spark table for the vortec? Weather here has been nasty, gonna try to get the truck timed perfectly this weekend. I bought a piston stop tool since I no longer have the timing tab on the new engine. Once I do that I'll post the logging results. Anyone know if I need to keep my base timing at 0 degrees or if I need to advance/retard timing to make the vortec work with this setup?

I posted an excel spreadsheet with the Vortec timing table here:

http://www.gearhead-efi.com/Fuel-Inj...-Throttle-ONLY!

dave w

[jalatl]

That's awesome. Thanks!! Hoping to give it a try this weekend. I'll let you know how it goes. I'm sure I'll have a few more questions before I get it right lol

[jalatl]

So, I'm thinking the best route is to copy my .bin and adjust the timing tables in tunerpro with the above spreadsheet. I forgot to mention there is no EGR port on the new intake so I need to delete or modify those parameters as well? I currently have the EGR solenoid plugged in but would like to remove if possible. Other than timing and EGR modifications are there other things that I should modify in the bin to start with? Before I burn anything I will post the log and see what yall think... just trying to get ahead of the game a bit.