Results 1 to 4 of 4

Thread: Tuner Pro Connection Issue

  1. #1
    Fuel Injected!
    Join Date
    Sep 2017
    Age
    48
    Posts
    26

    Tuner Pro Connection Issue

    Hello,
    I cannot get Tuner Pro to recognize the cable I have connected. When I launch TP, the dialogue box at the bottom for "DA: is yellow and says "not connected." I have it set to COM 2. It was on COM 5 and not recognized, so switched it to COM 2 with no change.

    I'm using a cable from OBD1 diagnostics.

  2. #2
    Fuel Injected!
    Join Date
    Dec 2017
    Posts
    116
    Yes I’m having the same issue. I just got it on Thursday and I’m not having much luck yet.
    “.Test for valid interface using settings”
    I tried com port 1,2,3,4,5,6,7. None of the work..It says cable not found or not functioning..

  3. #3
    Fuel Injected!
    Join Date
    Jan 2017
    Posts
    411
    Try this: http://www.totalcardiagnostics.com/s...d-obd-software

    I've spent a considerable amount of time troubleshooting this. If you're using an APU1, what I've found out is TPRT doesn't let you change the COM port when APU1 is selected. With that said, set APU1 to pass thru, open device manager, plug in USB and observe which COM port it comes up with. Launch TPRT, Tools>Preferences, if not the same change COM port to the same number as in the device manager and "Test for valid interface..." Switch from pass thru to APU1, but you'll no longer be able to "Test for valid interface..." however it should detect hardware when "initialized." Also on XP, it required a reboot. Can't remember which Win 7/10, had to close and relaunch TPRT. Next on the agenda...Surface Pro w/ Win 10. YMMV

  4. #4
    Fuel Injected!
    Join Date
    Dec 2017
    Posts
    116
    Can’t be leave it but that worked!!!!! Thanks for that post!!!
    That should be a sticky in TP forum!!

Similar Threads

  1. Tunerpro RT ALDL connection issue
    By iaff284 in forum TunerPro Tuning Talk
    Replies: 2
    Last Post: 07-16-2017, 01:22 AM
  2. $EE ADX connection issue.
    By Badassbird in forum TunerPro Tuning Talk
    Replies: 11
    Last Post: 04-12-2014, 06:08 PM
  3. OBD II/ I Y Cable connection issue?
    By purpleflamzz in forum TunerPro Tuning Talk
    Replies: 7
    Last Post: 06-25-2012, 07:22 PM
  4. help with 6e connection
    By fasteddi in forum GM EFI Systems
    Replies: 21
    Last Post: 06-04-2012, 04:09 AM
  5. TunerPro Connection issue 7747 $42
    By ninerscout in forum TunerPro Tuning Talk
    Replies: 14
    Last Post: 03-31-2012, 05:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •