I downloaded a FTDI driver. No change. Still no hardware found. Windows 7 if that makes a difference.
I downloaded a FTDI driver. No change. Still no hardware found. Windows 7 if that makes a difference.
I don't own any of these toys so bear with me if this doesn't help...
https://youtu.be/OYgYEoQkjT8?t=170
Com port 3. That connects as it should. All the lists show how the truck runs. Shows no errors.
One other thing. I'm not using a g2 adaptor for the 24 to 28 pin. I took a 28 pin dip socket and jumpered pins 1,2,26,27,28 together and they go into where the old 24 pin was. I'm under the impression that's all the g2 adaptor does. Could that be my problem? I've continuity checked to make sure ones that are jumpered are connected and ones that shouldn't be aren't.
No, that will have no effect on whether the laptop sees the AutoProm or not.
Have you set the Interface type to AutoProm/MAFTPro under the Data Acq./Emulation tab in tools > Preferences?
The man who says something is impossible, is usually interrupted by the man doing it.
Yup the autoprom is selected
Bookmarks