Results 1 to 4 of 4

Thread: Can someone look at a log from a new motor and see how things look?

  1. #1
    Fuel Injected!
    Join Date
    Feb 2014
    Location
    Upstate, NY
    Posts
    416

    Can someone look at a log from a new motor and see how things look?

    A new goodwrench 350 tbi was put into an 88 chevy k2500. I made a log file from a short highway drive. I did not turn off any parameters such as egr etc. I noticed that the knock counts keep climbing. The truck is completely stock with the akaj bin. The only thing changed in the chip is the desired afr was changed to 14.10 for e10 fuel.
    Attached Files Attached Files

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Attached are screen shots from the above posted data log.

    Code 51??

    BLM Averages are a slightly rich.

    IAC looks slightly high, normally IAC counts are between 10 - 40 steps at idle. New engines seem to have slightly high IAC steps.

    O2 sensor looks mostly normal.

    I suggest applying the Spark Advance Hack.

    dave w
    Attached Images Attached Images

  3. #3
    Fuel Injected!
    Join Date
    Feb 2014
    Location
    Upstate, NY
    Posts
    416
    I took the chip out of the ecm so my dad could see how the truck ran on just the netres. That's why the code 51. I tried to reset the iac a few times by doing the pin ab jump method. Fully closed iac idle is 500rpm. Idle with iac plugged in is 600 rpm. What is the spark advance hack?

  4. #4
    Fuel Injected!
    Join Date
    Jan 2017
    Posts
    411
    I know sometimes it can be difficult to use search when you don't know what French words to use...spark+promid
    http://www.gearhead-efi.com/Fuel-Inj...2357-ADX-files

Similar Threads

  1. well this things cool. set up input?
    By De-stroker in forum GM EFI Systems
    Replies: 1
    Last Post: 04-22-2017, 07:26 AM
  2. Things I would like to see here as a tuner
    By Lucky in forum Gear Heads
    Replies: 7
    Last Post: 01-29-2016, 10:19 PM
  3. Trying to datalog but only couple things come up
    By BigBanks78 in forum TunerPro Tuning Talk
    Replies: 35
    Last Post: 09-23-2015, 09:18 PM
  4. Replies: 1
    Last Post: 11-12-2014, 02:30 AM
  5. Few things for sale .....
    By Nasty-Z in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 04-13-2012, 06:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •