Results 1 to 6 of 6

Thread: ISO AEM Uego Wideband O2 Gauge

  1. #1
    Fuel Injected!
    Join Date
    Feb 2015
    Location
    Ogden, UT
    Age
    40
    Posts
    139

    ISO AEM Uego Wideband O2 Gauge

    I want to replace the gauge that was stolen earlier this year so I can dial in the tune with 61 lb injectors. I still have the 02 sensor, but the gauge and wiring were ripped out with the ECM.
    1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10

  2. #2
    Fuel Injected!
    Join Date
    Feb 2015
    Location
    Ogden, UT
    Age
    40
    Posts
    139
    Bump. Still looking. Any wideband gauge with 0-5v output for data logging would work too. Just want to get back in to tuning this 383.
    1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10

  3. #3
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    Look at 14point7.com

    They make inexpensive WBO2 systems. I use them nearly exclusively, though I do have an AEM Failsafe in one of my cars (because I got a decent deal on it) and have used Innovate and PLX in the past.
    The man who says something is impossible, is usually interrupted by the man doing it.

  4. #4
    Fuel Injected!
    Join Date
    Feb 2015
    Location
    Ogden, UT
    Age
    40
    Posts
    139
    Quote Originally Posted by Six_Shooter View Post
    Look at 14point7.com

    They make inexpensive WBO2 systems. I use them nearly exclusively, though I do have an AEM Failsafe in one of my cars (because I got a decent deal on it) and have used Innovate and PLX in the past.
    The Spartan 2 looks promising. I can wire it to the EGR pin when data logging, and a gauge when not. I was looking at the PLX system also. Thanks for the recommendations.
    1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10

  5. #5
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    My experience with PLX was not a good one...

    I never had problems with my Innovate controllers, but I sold them before I had a chance to have any problems. lol

    14point7 has been solid for me for about 8 years, maybe longer.
    The man who says something is impossible, is usually interrupted by the man doing it.

  6. #6
    Fuel Injected!
    Join Date
    Feb 2015
    Location
    Ogden, UT
    Age
    40
    Posts
    139
    Maybe I'll give it a try then. Hopefully the sensor I have is still in good shape.
    1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10

Similar Threads

  1. Replies: 6
    Last Post: 07-08-2017, 05:33 PM
  2. 2 1/16 gauge ECM data display
    By 3400tZ in forum Other EFI systems and related topics
    Replies: 83
    Last Post: 09-03-2015, 05:38 AM
  3. Fuel pressure gauge
    By trippyjoey in forum GM EFI Systems
    Replies: 15
    Last Post: 09-13-2014, 10:53 PM
  4. Tuning 1227747 VE tables in open loop with a wideband gauge
    By mmigacz in forum TunerPro Tuning Talk
    Replies: 5
    Last Post: 04-18-2014, 09:23 PM
  5. Innovate MTX-L wideband gauge video
    By JeepsAndGuns in forum Gear Heads
    Replies: 9
    Last Post: 03-19-2012, 06:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •