Results 1 to 3 of 3

Thread: Trouble uploading new bin LT1

  1. #1
    Fuel Injected!
    Join Date
    Mar 2015
    Posts
    30

    Trouble uploading new bin LT1

    I have a 94 LT1 that has been transplanted into a 95 K2500. Was originally trying to run the engine off the LT1 pcm and the trans off the truck pcm. Ran into some issues.
    I've since rewired the transmission to the LT1 ECM, added a signal wire for the torque converter PWM signal and trying to upload a 95 Bin file.
    I'm using eehack. I get a good connection, the pre-upload tests are good. When I hit upload, I get an error ERROR TRYING TO APPLY VPP VOLTAGE.
    Any help is much appreciated.

  2. #2
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    probably need a bit more battery voltage at the ecm. it's picky for a reason. make sure all accessories are turned off and voltage is dead stable and at least 12v at the ecm

  3. #3
    Fuel Injected!
    Join Date
    Mar 2015
    Posts
    30
    Thanks Steveo. You're the man.

Similar Threads

  1. trouble with 1227165
    By icepaws in forum GM EFI Systems
    Replies: 0
    Last Post: 09-02-2017, 07:41 PM
  2. trans trouble
    By ony in forum Gear Heads
    Replies: 3
    Last Post: 01-20-2016, 08:28 AM
  3. About to get myself into trouble
    By sk8rh8r in forum Introductions
    Replies: 3
    Last Post: 03-21-2014, 05:51 AM
  4. having trouble connecting to pcm
    By englundjd in forum TunerPro Tuning Talk
    Replies: 23
    Last Post: 09-01-2013, 07:38 PM
  5. trouble connecting
    By zeekstr17 in forum GM EFI Systems
    Replies: 17
    Last Post: 08-03-2012, 06:24 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •