Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 2 of 2

Thread: Identifying my ECM

  1. #1
    Electronic Ignition!
    Join Date
    Nov 2015
    Age
    67
    Posts
    11

    Identifying my ECM

    Hello all,
    I have been away from the forum for a while since I was involved with other issues.
    Now that I am back on my project ' converting my GM 350 from carburetor to TBI' I am in a conundrum regarding my ECM.
    I pulled the electrical harness and ECM from a Chevy 1500 with a 350 motor.
    However, I have no way of knowing what the ECM number is.
    Over the year I have had the parts stored away in my shed and now that I am ready to rework the harness for the ECM, the sticker on the ECM is gone.
    I believe that the ECM is a 1227747 but I am not sure.
    The only numbers I have available to me is on the PROM (1612 AMUR 0054) and a barcode sticker next to the CALPAC (4207071310499026)
    The PROM is now useless as I broke 2 of the pins when I was trying to take the PROM out of its holder so I will also need a new PROM.
    Without the ECM number I do not know how to order the new PROM. If I can get the PROM is it pre-programmed (plug and play)?
    Do I have to buy a new ECM since I am not sure what the number is?
    FYI: My friend who has a chevy van with a 350 motor swapped my ECM to his vehicle prior to me messing the PROM up and his vehicle ran with the ECM.
    His ECM number is 1227747 so I am assuming that mine is also.
    Also since I have some financial constraints at the moment, I am looking to buy some known good sensors:
    Coolant Temperature Sensor (CTS): 12146312; 25036979
    Throttle Position Sensor (TPS): 12116257; 17111787; 17111471
    Manifold Absolute Pressure (MAP): 16137039; 2131545; 16017460; PS10076
    Idle Air Control Valve (IAC): 17111460; 25527077; AC102
    Engine Spark Control Module (ESC): 16128261; 16131231

    Any help would be greatly appreciated

  2. #2
    Fuel Injected!
    Join Date
    Oct 2013
    Posts
    789
    AMUR is one of the bin files posted in this '7747 ECM thread. Says it's from a 87 van so I'd guess your friend left you with the van ECM.

    http://www.gearhead-efi.com/Fuel-Inj...Information-42

    CTS and MAP should be purchasable new at about $10-$15 each. Hardly worth sourcing used there. TPS is a little more. The IAC is one of the more failure prone items, so might be wise just to go new on that one.

Similar Threads

  1. Need help identifying ECMHEI
    By Dr_Grip in forum GM EFI Systems
    Replies: 1
    Last Post: 05-20-2016, 12:54 AM
  2. Identifying a Fuel Injector by Case Numbers
    By NAE in forum GM EFI Systems
    Replies: 3
    Last Post: 04-18-2015, 02:25 PM
  3. Identifying Cal Files for Organizing
    By 1project2many in forum TunerCat OBDII
    Replies: 4
    Last Post: 02-02-2013, 06:08 PM
  4. Identifying an ECM
    By EagleMark in forum GM EFI Systems
    Replies: 0
    Last Post: 02-24-2011, 11:22 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •