Originally Posted by
EagleMark
Now that the VE table is smoothed out we can do some data logging.
To get better data logs there are a few more things to do that helps for accurate data and filling more cells.
Turn off:
1. EGR
2. PE.
3. Air pump.
4. DFCO
5. Hiway Lean Cruise if applicable.
Have vehicle warmed up and driven a little, then start data log. Try and have a route planned where you can drive a steady throttle state, like getting on the freeway at 10% throttle till top speed or whatever is safe. Next on ramp 20%, then 30%, 40%, 50% etc... your coming off freeway and getting back on helps for other data or do some around town driving.
Bookmarks