I'm not sure what has changed or why but I have lost my WB in my data feed. I have swapped LC1's, swapped ECMs. downloaded the lastest S_AUJP files and nothing has helped. The WB is plugged into F14 just like it has been since I swapped over to the 7730. I can swap F14 and F15 pins and see the voltage for the WB on F15 but still nothing on F14 from the MAP(I thinks what F15 was). I tried the chip test and didn't get any voltage (assuming I was doing it correctly)so I swapped ECMs and still nothing.
ok, this is where it gets over my head. I can flash in Code $59 and the WB reads out just fine. I don't know how to move forward from here, any ideas?
The attached file are what I have been running. as well as the $59 used that actually worked. Current is for S_AUJP and the the Ostrich new Iroc was one of the files in the $59 folder
Thanks
Bookmarks