Hello Dave w.got the cable for my programmer.did the socket mod on the 7747.read the bin from stock chip.made a couple small adjustments.initial timing to 10°.egr off.bpw to 145.burned that to sst27sf512 with the offset listed on moates site because I could not find specific info on that chip for gq4x.anyway it started first shot and ran.it seemed like the miss was worse.I put the 5.0 I injectors in and burned chip again bpw 131.worse.I tried 2 other burns.both were minor to the bpw.the one I drove to work in bpw set at 149.it feels better mid throttle now but not as strong low end as b4.blm at idle is 128.driving in 5th at 2200 rpm its 160-170.so I have lots to learn.but this is all new to me and I'm loving it.so cool to be able to do.wishing I got into this year's ago.thanks to all the info on this site it's made learning a lot easier.now I have to look at my logs and see the changes I made after each burn.try to figure what is needed.
Bookmarks