Results 1 to 3 of 3

Thread: no aldl stream problem

  1. #1
    Fuel Injected!
    Join Date
    Aug 2012
    Posts
    386

    no aldl stream problem

    6395 ecm OE and moates apu1 and TP rt. When I put it all away over a year ago data logging and chip burning worked fine. Went to use it yesterday and no data sream showed up on tp dash. I checked both switches on Apu were to the right ( 8192 and pass through ). The aldl to apu cable is the same one I have always used. I am able to erase and burn a chip so don't think there is a problem with comm ports as the apu talks to the laptop. Does anyone have a test or idea I can try.
    6395, BHDF, 7.4 BBC lightly modded now 6395 BMHM back to BHDF

  2. #2
    Fuel Injected! MQQN28's Avatar
    Join Date
    May 2016
    Location
    Melbourne Australia
    Age
    76
    Posts
    65
    Hello Myburb

    Try this procedure from the moates site. Possibly sitting for a year it falls into this category.

    Many of our products have physical switches on them to change device behavior. Unfortunately, we’ve noticed quite a few problems related to these switches. Over time, sometimes switches fail to behave as you would expect them to. We suspect this is due to oxidation on the contacts, dust or another slow-acting cause.
    Affected Devices
    These devices use the switches which are known to have issues:
    •AutoProm / APU1
    •Ostrich2
    •ALDU1
    Solution
    Fortunately, the solution to switch glitching is really easy. Sliding the switch back and forth vigorously 5-10 times has been successful in restoring normal operation.
    Ford 28 Roadster Pick Up
    Ford Flathead 51 8BA. Balanced, ported,3/4 cam, Edelbrock 59A heads, C4 trans, 8" diff 3.55 narrowed 40mm /side.
    Fuel injection by Flatattack racing, 60mm Holden TB.
    ECM Delco 1227808 160 baud.

  3. #3
    Fuel Injected!
    Join Date
    Aug 2012
    Posts
    386
    Thanks for that info. I hadn't seen that on moates site. I tried it but unfortunately that didn't work. The indicators in TP RT indicated things were changing between apu mode and pass through mode. Your ride sounds cool.
    6395, BHDF, 7.4 BBC lightly modded now 6395 BMHM back to BHDF

Similar Threads

  1. hello looking for adx file to data stream
    By shawnsdad in forum GM EFI Systems
    Replies: 1
    Last Post: 05-18-2015, 08:35 AM
  2. Replies: 2
    Last Post: 04-26-2015, 05:31 PM
  3. Problem with the ECM ALDL and TunerPro RT
    By RRice in forum TunerPro Tuning Talk
    Replies: 0
    Last Post: 08-05-2014, 11:19 AM
  4. OBD2 data stream ?'s
    By buddrow in forum OBDII Tuning
    Replies: 1
    Last Post: 01-30-2014, 05:50 AM
  5. OBD1 data stream
    By damanx in forum TunerPro Tuning Talk
    Replies: 4
    Last Post: 10-11-2013, 05:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •