That's it! I'm effing done with this ECU! Going to megasquirt!

[Turbo Nasty]

Here's the injector offsets that my tunerpro RT rejects every time. For Bosch type 3, 32lb

9V
0.954994

9.5V
0.827989

10V
0.725101

10.5V
0.646214

11V
0.573173

11.5V
0.500671

12V
0.435207

12.5V
0.386359

13V
0.339858

13.5V
0.292894

14V
0.24897

14.5V
0.212892

15V
0.176967


I know these are not the direct values to put into tunerpro because tunerpro goes something like 14.0v, 14.2, 14.4 etc. I found a fancy calculator somewhere to convert the values for me. I think I have them written down here somewhere.

[steveo]

those are msec. a millisecond is 1000 microseconds (usec).
multiply by 1000. it may round to ~30usec

[Turbo Nasty]

those are msec. a millisecond is 1000 microseconds (usec).
multiply by 1000. it may round to ~30usec

Yes they are. I bet this will make a big difference in the tune. And by the way I am using a wideband AEM EUGO I think you asked earlier.