Yesterday connected the tech ii scanner, well first - therd engine start, the engine idles at 1400 rpm, but in about 30 sec shut, i have to apply the accelerator to keep it running, but it still shuts, the 4th start i manage to keep it running by applying the accelerator, then it starts to reach extreamly high idle of 2300-2400rpm, and keeps runing at that speed, doesnt lower the idle at all. I have connected the tech ii, go to loop, and apply the open loop, the engine dropes the idle to 1250-1400 rpm, as soon as i exit the settings, it goes back to closed loop, rises back the rpm, and SHRTFT bank 1 & bank 2 goes up till 48%. I checked the firmware with tunercat, and it`s set to open loop.
As well it sees the transmission on 3rd gear, all thaw it is not connected, i run the 700R4. If i disconect my IAC, it drops the idle to low 650-750rpm. Anyway, instead of describing all data, let me implement the pictures and an pdf for easier and more clear view. If anyone has any advice, it would be grate, i`m braking my head where to go from here.
Reply With Quote
Bookmarks