Results 1 to 2 of 2

Thread: New guy on this "Hardware not found"

  1. #1
    Carb and Points!
    Join Date
    May 2017
    Posts
    1

    New guy on this "Hardware not found"

    Hi.

    I have built myself a test bench to be able to flash GM ecms. I am using an ELM327 Obd2 interface. I have the ELM327 plugin.

    The problem is that TP RT says "hardware not found". When I press the connect button with power on ecm, I get about 40 Hz in the box down in the left corner. If I turn off the power, I only get about 5 Hz.


    I know the ELM327 Interface works when I managed to get into ecm with other software.


    Ecm I have is a 12200411 and will come from a 2002 Tahoe.


    I'm new to this software but I would have been grateful for helping to get into my ecm.

    Here is a picture of how it looks.


    tuner.jpg
    Have searched here on the forum but did not find answers to what I'm looking for.
    If the post is in the wrong category, I apologize and admin can move it correctly.


    Sorry for bad English.


    Best regards / Alexander.
    Attached Images Attached Images

  2. #2
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Newzealand
    Posts
    483
    Looks like its working it's logging at 40hz.you won't get it saying hardware found that's more for ostrich emulator and some ecus modded for real-time tuning.tunerpro can't flash the lsx ecus you can use it and xdfs to tune and then reflash with other software .

Similar Threads

  1. SparkFun FTDI Basic Breakout 5V card "cables"
    By EDZIP in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 07-20-2017, 10:11 PM
  2. Replies: 3
    Last Post: 07-06-2017, 06:03 AM
  3. TunerPro datalog "monitor" time zooming issues.
    By damanx in forum TunerPro Tuning Talk
    Replies: 1
    Last Post: 11-23-2013, 06:09 AM
  4. Replies: 55
    Last Post: 11-13-2013, 03:55 PM
  5. Replies: 4
    Last Post: 07-10-2012, 08:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •