Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 4 of 4

Thread: Tunerpro RT won't communicate

  1. #1
    Carb and Points!
    Join Date
    Sep 2017
    Posts
    8

    Tunerpro RT won't communicate

    Hi guys,
    I downloaded Tunerpro RT v5.00.
    I opened the application, loaded BIN, XDF & ADX files.
    I went into preferences & set latency time to 1 ms. When I run cable test, it can't establish communications.
    I'm able to read vehicle info from PCM with winflash.
    Any idea what I could be doing wrong?
    Thanks

  2. #2
    Fuel Injected!
    Join Date
    Dec 2016
    Location
    Colorado
    Age
    33
    Posts
    81
    Do you know what comm port your computer is suppose to communicate on?

  3. #3
    Carb and Points!
    Join Date
    Sep 2017
    Posts
    8
    In winflash, I selected Port 6 & it worked

  4. #4
    Fuel Injected!
    Join Date
    Dec 2016
    Location
    Colorado
    Age
    33
    Posts
    81
    That was using the same cable I assume? I would think it would be the same port if the same cable.

Similar Threads

  1. HI, trying to communicate with 7749
    By Superbee in forum GM EFI Systems
    Replies: 3
    Last Post: 03-14-2014, 09:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •