Results 1 to 15 of 19

Thread: Tunning For Better Throttle Response

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    63
    Posts
    98
    Quote Originally Posted by uncabob View Post
    Do you have the large cap HEI? If so you might check Spark latency table if it is included.
    I do have the large cap, I will look for the spark latency table. thanks

  2. #2
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    63
    Posts
    98
    I found a Spark Latency Correction table. from what I have read it is for "It corrects the timing based on the A/C alternator effect of the pickup/ reluctor." and thats about what I know at this point

  3. #3
    Fuel Injected! uncabob's Avatar
    Join Date
    Jan 2016
    Age
    87
    Posts
    121
    Quote Originally Posted by eutu1960 View Post
    I found a Spark Latency Correction table. from what I have read it is for "It corrects the timing based on the A/C alternator effect of the pickup/ reluctor." and thats about what I know at this point
    Try searching for spark latency tables for large cap on Corvettes over on third.gen. IIRC it has to do with the larger radius
    and the time it takes the rotor to move from point to point. It made a big difference for me.
    Bob
    Don't force it, get a bigger hammer!

  4. #4
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    63
    Posts
    98
    Quote Originally Posted by uncabob View Post
    Try searching for spark latency tables for large cap on Corvettes over on third.gen. IIRC it has to do with the larger radius
    and the time it takes the rotor to move from point to point. It made a big difference for me.
    Bob
    OK but I already have a large cap with the correct bin with the latency table for a large cap, are you saying I should switch to a small cap latency table or are you saying use the large cap latency table.

  5. #5
    Fuel Injected! uncabob's Avatar
    Join Date
    Jan 2016
    Age
    87
    Posts
    121
    Quote Originally Posted by eutu1960 View Post
    OK but I already have a large cap with the correct bin with the latency table for a large cap, are you saying I should switch to a small cap latency table or are you saying use the large cap latency table.
    Nope: Sounds like you should be good. Sorry if I side-tracked you.
    Bob
    Don't force it, get a bigger hammer!

  6. #6
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    63
    Posts
    98
    Quote Originally Posted by uncabob View Post
    Nope: Sounds like you should be good. Sorry if I side-tracked you.
    Bob
    Thats OK Thanks anyway, any input is better than no input.

  7. #7
    Fuel Injected! uncabob's Avatar
    Join Date
    Jan 2016
    Age
    87
    Posts
    121
    Quote Originally Posted by eutu1960 View Post
    Thats OK Thanks anyway, any input is better than no input.
    Mine appears to be different than your latency table. This one is for corvette with large cap.
    The table you are using looks like my old one. My engine is basically a stock 84 corvette L83 5.7l.
    Got this from 3rd Gen.

    800 214
    1200 275
    1600 305
    2000 244
    2400 275
    2800 244
    3200 305
    3600 320
    4000 290
    4400 305
    4800 305
    5200 305
    5600 305
    6000 305

    Bob

    p.s. My ecm is 7747 not the original. It came with a chip for a '87 van w/o large cap.
    Last edited by uncabob; 08-13-2017 at 02:12 AM. Reason: added ps info
    Don't force it, get a bigger hammer!

Similar Threads

  1. tunercat tunning
    By aboturky in forum TunerCat OBDII
    Replies: 9
    Last Post: 10-13-2016, 04:25 PM
  2. tunning
    By ony in forum OBDII Tuning
    Replies: 3
    Last Post: 04-27-2016, 04:58 PM
  3. Let the tunning BEGIN!!
    By sikpupy in forum Introductions
    Replies: 3
    Last Post: 03-29-2015, 05:16 AM
  4. 95 LT1 throttle response
    By Dewayne_S in forum GM EFI Systems
    Replies: 7
    Last Post: 02-02-2013, 02:56 AM
  5. Been tunning a little while.
    By 18436572 in forum Introductions
    Replies: 2
    Last Post: 08-19-2012, 03:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •