Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 15 of 23

Thread: red devil blue tooth problem

Threaded View

  1. #16
    Fuel Injected! MQQN28's Avatar
    Join Date
    May 2016
    Melbourne Australia

    Try this adx file and see if it works.
    With ALDL Droid when you press connect ECU button it switches the 10k resistor and the data stream should start. The blue led will be flashing and then change to green yel/red.
    If ALDL droid indicates no data stream check if the CEL light is flashing , probably look like it is full on. This will tell you if the data stream has at least started.
    If this works your data may be a bit off due to this file, but we just want to see if the data stream starts.
    If this doesn't work it may be another problem other than the ADX file or both.

    sorry I put up the wrong file. I will change it and put the right one up in the morning.

    Attached Files Attached Files
    Last edited by MQQN28; 09-06-2017 at 02:36 PM.
    Ford 28 Roadster Pick Up
    Ford Flathead 51 8BA. Balanced, ported,3/4 cam, Edelbrock 59A heads, C4 trans, 8" diff 3.55 narrowed 40mm /side.
    Fuel injection by Flatattack racing, 60mm Holden TB.
    ECM Delco 1227808 160 baud.

Similar Threads

  1. 7730 ecm 40 tooth tone ring
    By misterpat in forum GM EFI Systems
    Replies: 9
    Last Post: 05-12-2017, 05:04 PM
  2. Red/blue connectors
    By myburb in forum GM EFI Systems
    Replies: 0
    Last Post: 10-16-2015, 06:56 PM
  3. Looking for a disassembly of 12613246 OS Green Blue PCM
    By james_adams2006 in forum GM EFI Systems
    Replies: 2
    Last Post: 07-01-2015, 05:10 AM
  4. 40 tooth vss sensor gap/clearance
    By JeepsAndGuns in forum Gear Heads
    Replies: 7
    Last Post: 01-06-2015, 05:11 PM
  5. Strange issue using red devil river and aldl droid
    By davidgoodin in forum GM EFI Systems
    Replies: 11
    Last Post: 11-20-2014, 05:35 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts