red devil blue tooth problem

[MQQN28]

Dom

Try this adx file and see if it works.
With ALDL Droid when you press connect ECU button it switches the 10k resistor and the data stream should start. The blue led will be flashing and then change to green yel/red.
If ALDL droid indicates no data stream check if the CEL light is flashing , probably look like it is full on. This will tell you if the data stream has at least started.
If this works your data may be a bit off due to this file, but we just want to see if the data stream starts.
If this doesn't work it may be another problem other than the ADX file or both.


Dom
sorry I put up the wrong file. I will change it and put the right one up in the morning.

MOC