Results 1 to 10 of 10

Thread: Tuning 355 LT1 with 231/239 Cam & LE2 Heads

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected!
    Join Date
    Mar 2017
    Location
    Utica, IL
    Age
    46
    Posts
    42

    Tuning 355 LT1 with 231/239 Cam & LE2 Heads

    Hi all, I have spent the last two years upgrading my 59k mile 96 Camaro SS. Current mods are in the sig. I have EEhack, TunerPro and an AEM wideband all setup working and logging great. I have spent numerous hours reading tons of threads and websites on tuning. Overall the car is in fairly pristine shape and the motor has about 400 miles on it after a complete rebuild. O2 sensors and injectors are brand new. I am fairly confident there are no exhaust leaks. I do not have any obvious intake leaks but I cannot be 100% certain on that there are no intake leaks at the manifold or TB. I do not believe there is an intake leak at this point.

    Currently running closed loop with MAF. Not opposed to going to CLSD since this car is more of a weekend warrior now, but would certainly keep the MAF if I can.

    As of right now I have a fairly basic tune in the car that I got from an email tuner. I made the following changes to that tune.

    Turned off EGR, Air pump, AC, Stall Saver, Skip Shift, TC
    Set injector flow rate and offsets correctly. Received data directly from Fuel Injector Connection
    Made adjustments to O2 Swing voltage and Int Delay per @steveo website
    Adjusted CORRCL Airflow %.
    Changed idle timing to 32 and eliminated Idle Timing correction
    Changed idle to 850 RPM.

    The car feels like it idles better than it did and it is smoother taking off from a stop. MAP kpa dropped to 59.2 from 65.7 with the changes above.

    The first issue I am having is that my BLM's are both showing +25% at idle during closed loop. Wideband shows high 14's during closed loop and 16-17 during open loop. Since it is driving better at idle should I worry anymore about the idle right now or just blame it on the cam?

    Overall the car does not run too bad but I know it has a lot more left in it. It is showing lean during cruising and rich in PE mode. No knock.

    Just hoping to get some advice on what my next steps should be. Should I continue to work on the idle or should I turn off PE and MAF and start running the Trimalyzer to dial in my VE tables?

    I am attaching a log from a short run tonight if anyone want to take a look. Thanks for any input!
    Attached Files Attached Files
    1996 Camaro SS #308, M6, 4.10, OBD-I Conv, OBX 1-7/8" Stainless Headers, Custom 3" Stainless Y Pipe, 2OTL
    355-Stock Crank, 6" Forged Rods, Forged Pistons-11.5:1 SCR, LE2 Heads, LE2 Ported Intake,
    LE/Lunati 231/239 110 LSA Cam, Comp Pro Mag 1.6 RRA, Ford LU34 36-lb Injectors, 58mm TB, SD Tune

Similar Threads

  1. Squarebody with TBI and Vortec Heads
    By brandon6469 in forum Introductions
    Replies: 0
    Last Post: 09-30-2016, 07:07 AM
  2. Modified Vortec heads
    By old truck guy in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 02-15-2016, 07:17 PM
  3. WTB 062/906 vortec heads
    By Tylerz281500 in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 01-04-2015, 11:05 PM
  4. tbi into 76 vortec heads ?
    By BIGWORM76 in forum GM EFI Systems
    Replies: 33
    Last Post: 04-19-2013, 07:24 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •