Turbo 400 to 4l80e swap need help

**Antipoped** · 07-22-2017

And one of those AWAY files should be AWAW

**Antipoped** · 07-22-2017

And now that I look at it....the other AWAY file should be AWAX (stupid auto correct)

**myburb** · 07-22-2017

I have been following this thread and seen a few refs to plugnplay. Most of the time when you mod the type of things the guys do on this board is not plugnplay in the sense you drop in a chip and go driving. You might want to say what your exact expectations are.

**dktool** · 07-23-2017

Originally Posted by myburb

I have been following this thread and seen a few refs to plugnplay. Most of the time when you mod the type of things the guys do on this board is not plugnplay in the sense you drop in a chip and go driving. You might want to say what your exact expectations are.

It looks like he has found the correct factory bin for his vehicle, I was only offering a known good cal for a 1992 7.4 / 4L80E on a chip for a 7060 pcm to get him running, from there I anticipated him doing fine tuning. If not, then he does need the exact bin for his exact build so he can "plug and play" (his words, not mine)