Results 1 to 1 of 1

Thread: hello 440 mopar

  1. #1
    Carb and Points!
    Join Date
    Jul 2017
    Posts
    3

    hello 440 mopar

    hello new to the forum i hope i'm following proper prot i haven't delt with transfrering the gm tbi before this is my first so here is my info if anyone is willing to help i'll be very grateful i have a 1988 dodge dakota i put a 1978 440-3 out of a rv 727 non lock up i have already transfered the tbi ignition to the 440 i have the original wire harness from chevy truck i have a 1227747ecm i have a 7.4 throttle body i have a 3.73 8.8 ford rear end 26.6 rear tire hgt the motor is stock i have 3" exhaust straight duals i guess my question is what do i need to do with the ecm to keep my low end torque i dont plan on putting a big cam or changing the stock motor it cost to much to go further with a 440 so i just want it to have throttle response and burnout power at a stand still i hope someone can help thanx charlie
    Last edited by cwkerr; 07-17-2017 at 02:14 AM. Reason: wrong forum

Similar Threads

  1. Tuning options for Dodge Mopar
    By 34blazer in forum OBDII Tuning
    Replies: 160
    Last Post: 02-18-2021, 05:41 PM
  2. 440 Mopar TBI Swap, Questions
    By WT91 in forum GM EFI Systems
    Replies: 3
    Last Post: 06-03-2016, 10:35 PM
  3. Mopar guy here!
    By crzyxj in forum Introductions
    Replies: 0
    Last Post: 02-25-2016, 08:58 PM
  4. My Chevy pulling a Mopar!
    By woody80z28 in forum Gear Heads
    Replies: 3
    Last Post: 03-25-2012, 04:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •