Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 1 of 1

Thread: hello 440 mopar

  1. #1
    Carb and Points!
    Join Date
    Jul 2017
    Posts
    2

    hello 440 mopar

    hello new to the forum i hope i'm following proper prot i haven't delt with transfrering the gm tbi before this is my first so here is my info if anyone is willing to help i'll be very grateful i have a 1988 dodge dakota i put a 1978 440-3 out of a rv 727 non lock up i have already transfered the tbi ignition to the 440 i have the original wire harness from chevy truck i have a 1227747ecm i have a 7.4 throttle body i have a 3.73 8.8 ford rear end 26.6 rear tire hgt the motor is stock i have 3" exhaust straight duals i guess my question is what do i need to do with the ecm to keep my low end torque i dont plan on putting a big cam or changing the stock motor it cost to much to go further with a 440 so i just want it to have throttle response and burnout power at a stand still i hope someone can help thanx charlie
    Last edited by cwkerr; 5 Days Ago at 04:14 PM. Reason: wrong forum

Similar Threads

  1. Tuning options for Dodge Mopar
    By 34blazer in forum OBDII Tuning
    Replies: 138
    Last Post: 04-09-2017, 12:25 PM
  2. 440 Mopar TBI Swap, Questions
    By WT91 in forum GM EFI Systems
    Replies: 3
    Last Post: 06-03-2016, 12:35 PM
  3. Mopar guy here!
    By crzyxj in forum Introductions
    Replies: 0
    Last Post: 02-25-2016, 10:58 AM
  4. My Chevy pulling a Mopar!
    By woody80z28 in forum Gear Heads
    Replies: 3
    Last Post: 03-25-2012, 06:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •