Results 1 to 2 of 2

Thread: Dimented24x7's LS1 flash tool issue

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected!
    Join Date
    Jan 2012
    Location
    Poland
    Posts
    147

    Dimented24x7's LS1 flash tool issue

    Hi, I'm using AVT-852 cable with Dimented's LS1 flash tool. So far it was working OK, but I got into trouble with one PCM.

    It is 411 pcm from a truck with 9381344 operating system originally. I read the stock bin with no problems.
    Then I updated the PCM using Tech 2 SPS to the newest bin for the same VIN. It changed OS to 12205612. No problem reading/writing with LS1flash tool after that.

    Then I wanted to get a virgin calibration for another car I'm tuning, I programmed the PCM with a VIN for 2002 Camaro SS with 12212156 OS. Everything went OK and the PCM is working in the car, but after that SPS flash I can't start programming session using Dimented's tool.
    After I click "start programming session" the log says "Skipping security access" and then gives a timeout error. When this was working correctly, it would never log "Skipping security access", only get seed and send key.

    Has enyone encountered simmilar issue?

    I tried to reprogram it again with SPS, but it didn't help. I even went back to the original VIN with truck OS, but still the same result.

    I think that must be something with SPS changing the security access when programming...

    Thanks for any help!
    Last edited by dzidaV8; 07-13-2017 at 11:49 PM.

Similar Threads

  1. LS1 Flash Tool Released
    By antus in forum OBDII Tuning
    Replies: 118
    Last Post: 4 Weeks Ago, 07:02 PM
  2. $EE Flash tool progress
    By steveo in forum GM EFI Systems
    Replies: 112
    Last Post: 12-17-2015, 06:30 PM
  3. Group Buy for LS1 Flash Tool AVT 852 cable!
    By EagleMark in forum OBDII Tuning
    Replies: 73
    Last Post: 03-02-2014, 11:11 PM
  4. Replies: 8
    Last Post: 02-12-2014, 06:25 AM
  5. Memcal Flash Tool
    By EagleMark in forum GM EFI Systems
    Replies: 6
    Last Post: 01-22-2013, 05:26 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •