Results 1 to 4 of 4

Thread: How do you flash a PCM for a 94-95 LT1 Y-Body?

  1. #1
    Carb and Points!
    Join Date
    Jul 2017
    Age
    25
    Posts
    8

    How do you flash a PCM for a 94-95 LT1 Y-Body?

    Howdy guys!

    I've got a 1994 Corvette who's PCM is hitting the dirt. I've shopped around but a lot of the LT1 PCM's I can get my hands on will need to be flashed for the Vette to run. I've looked around online but I'm not really certain of what I'll need to flash the new PCM, or how to best go about doing it so I don't muck it up.
    Does anyone have a particular software they use for flashing a PCM, or any certain tips/methods that work best for doing so, or a do's/don'ts for it? I really hope I can get her up and running again soon.

    Thanks!
    ~KenMathis

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    I use the LT1 Tuning Kit (software & hardware) from TunerCats: http://www.tunercat.com/cables/lt1kit.html

    $EEHack is a very good LT1 tuning option: http://fbodytech.com/eehack-2/

    Moates.net also offer a LT1 tuning option: http://support.moates.net/94-95-lt1-...bird-16188051/

    dave w

  3. #3
    Carb and Points!
    Join Date
    Jul 2017
    Age
    25
    Posts
    8
    Quote Originally Posted by dave w View Post
    I use the LT1 Tuning Kit (software & hardware) from TunerCats: http://www.tunercat.com/cables/lt1kit.html

    $EEHack is a very good LT1 tuning option: http://fbodytech.com/eehack-2/

    Moates.net also offer a LT1 tuning option: http://support.moates.net/94-95-lt1-...bird-16188051/

    dave w
    Once you get the hardware/software for this, how do you go about flashing the PCM with the bin file?
    I feel like it's probably something ridiculously simple, but I don't wanna muck around in something I'm unfamiliar with and brick my PCM the way I've bricked a few of my older laptops XD

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Quote Originally Posted by KenMathisHD View Post
    Once you get the hardware/software for this, how do you go about flashing the PCM with the bin file?
    I feel like it's probably something ridiculously simple, but I don't wanna muck around in something I'm unfamiliar with and brick my PCM the way I've bricked a few of my older laptops XD
    Simple yes, the flash (read / write) is through the Diagnostic Connector (ALDL Connector) in the vehicle. Load the .bin file into the software, then flash through the hardware connected to the Laptop / ALDL Cable.

    dave w

Similar Threads

  1. Tuner Pro XDF 1999-2000 F Body + Y Body
    By john h in forum OBDII Tuning
    Replies: 33
    Last Post: 02-02-2020, 11:12 PM
  2. F-body engine install to B-body
    By serge_an in forum GM EFI Systems
    Replies: 4
    Last Post: 09-22-2016, 02:51 PM
  3. 95 F-body Fuel Pump with 95 B-Body Engine/Tank
    By EPS3 in forum GM EFI Systems
    Replies: 7
    Last Post: 09-19-2016, 02:40 PM
  4. 68 body on 93 chassis
    By dud in forum Introductions
    Replies: 2
    Last Post: 01-02-2016, 07:13 AM
  5. LT4 HOTCAM 93 F BODY BIN
    By MYLTWON in forum TunerPro Tuning Talk
    Replies: 2
    Last Post: 11-22-2013, 08:44 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •