Hi, new here and at FI. I put a 1993 TBI 5.0L in a 1966 c10 pickup. Its a new build and was running great and all of a sudden started running bad. I noticed one injector was not spraying. I switched connectors and saw the injector worked, tested for voltage and am getting nothing from that side. (I am using a Howel Engineering harness, pink is 12v) I see that the 12v wire was pinched and is showing the bare wire, so maybe it shorted something. I ran a 12v wire to the injector and started it and it runs fine. Does anyone know where the other end of that wires goes? Could it be a blown fuse? Do injectors have a separate fuse for each injector? Any help would be appreciated.