I have a 93 tbi set up with a 625 ecu running E6 mask. currently i have the bin for bdjy which matches the id on my stock chip. the xdf is e6_tpv5_v250.xdf and adx is A204 Trans E6 Tp5 v250.adx. originally i had the ribben between the apu1 and the g1 socket backwards and i was not getting any change no matter what i changed in tuner pro 5 rt. I switched the cable and truck will start with the apu1 unplugged but when i plug it in with the above bin uploaded to it, the truck will not run or even try to run. Any thoughts? Thanks Jason
Bookmarks