Results 1 to 15 of 45

Thread: Where can I go for harness modifications

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #26
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Euless, TX
    Posts
    2,308
    Quote Originally Posted by pro View Post
    So I just leave the MAP connector on my TBI harness disconnected? Will the computer not throw codes? How will it measure air?
    The reason why I ask is I was under the impression that 89 and newer TPI use MAP sensors right? My 92 has one mounted on the side, like this Vette does:
    http://www.ebay.com/itm/90-91-Corvet...-/382059624647
    But I cant find a single unit like the one my camaro (MAP on the side).
    You can add a vacuum port or tee into the fuel pressure regulator vacuum port and run the MAP off that.

    You would not want a MAF setup if you can avoid it because you will need a cold start block off kit. The 1985-86 F-car and all Corvette TPI lower manifolds are also not drilled at the correct angle for the truck heads.
    Last edited by Fast355; 04-26-2017 at 09:17 PM.

Similar Threads

  1. Replies: 2
    Last Post: 10-17-2015, 08:58 PM
  2. late 80's GM Truck Small Block TBI Harness with section of vehicle harness
    By billygraves in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 05-05-2015, 06:37 PM
  3. CL tuning for exhaust modifications
    By steveo in forum GM EFI Systems
    Replies: 1
    Last Post: 12-23-2013, 06:43 AM
  4. Replies: 22
    Last Post: 09-28-2013, 02:35 PM
  5. Hardware modifications GM style...
    By Six_Shooter in forum GM EFI Systems
    Replies: 23
    Last Post: 02-03-2012, 09:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •