Sorry, what i did was Read EPRom, 27C512, and then save the bin. I just wanted to get my own baseline.
Are you referring to these bins, post 3:
http://gearhead-efi.com/Fuel-Injecti...Information-0D
As for the jumper wire for CPI, how is that going to work if I have to use the moates converter adapter?
BTW im out of town this weekend, maybe next weekend when i should have all parts on hand for swapping.
I burned my first chip and ignored the adapter and just used a dip socket. The height of the chip and dip socket was perfect underneath the cover when snapped on, so I suppose no soldering will be needed. Even with the cover off, it feels held in there pretty well.
Does anyone know why I cannot put higher than 3800 in "usec Added" in the Injector PW Correct vs Battery Voltage table? I need 7782 for the TPI injectors on a couple of the rows. I am just using row by row of what one of the Z28 bins has for its injector settings.
1992 Camaro Z28 5.7
1995 Silverado 5.7 TPI
Posting Permissions
Reply With Quote
Bookmarks