Results 1 to 6 of 6

Thread: 16168625 to 16197427

  1. #1
    Fuel Injected!
    Join Date
    Dec 2016
    Location
    Colorado
    Age
    39
    Posts
    120

    16168625 to 16197427

    I know these two pcms are very similar, but Im unsure if I can plug a 16197427 in place of a 16168625? I cant find a good pinout that I can read for the 8625. Thanks

  2. #2
    Fuel Injected! jim_in_dorris's Avatar
    Join Date
    Dec 2011
    Posts
    803
    Short answer is yes, they plug in the same connectors.
    Square body stepsides forever!!!

  3. #3
    Fuel Injected!
    Join Date
    Dec 2016
    Location
    Colorado
    Age
    39
    Posts
    120
    Thanks, compared and see no differences for the one I could find. I tried to use in place of my 8625 and something was not right, It started and ran but had cel and was rough.. I didnt have my laptop hooked up at the time. I will see what I can find out tomorrow with TP hooked up.

  4. #4
    Fuel Injected!
    Join Date
    Dec 2016
    Location
    Colorado
    Age
    39
    Posts
    120
    The pcm that was throwing codes and not running right, was from a 95 3500, 454, 4L80e. I tried another 9427 I have, which was BJYL and put my chip in and was fine. Got these for backups. Whats the difference between the two? They appear to both be 95 pcms, one a 4L80e and the other 60e. 454 vs 350.

  5. #5
    Fuel Injected! jim_in_dorris's Avatar
    Join Date
    Dec 2011
    Posts
    803
    That's a tough one, I am assuming that the 454 pcm and the 350 pcm were 7427's. Did you replace the memcal, or just the chip on the memcal? The knock sensor circuit is part of the memcal, and the 454 knock sensor is different than the 350 knock sensor.
    Square body stepsides forever!!!

  6. #6
    Fuel Injected!
    Join Date
    Dec 2016
    Location
    Colorado
    Age
    39
    Posts
    120
    When I tried both the 7427s in place of factory 8625 I used my factory memcal and g1 adapter with custom chip. Same I used on my 8625. Weird, so there must be some differences between the 1500 and 3500 versions of 7427's? Other that the chips I mean. I figured they would be the same other than whats on the memcal.

Similar Threads

  1. 4L80E with 16168625 ECU, is this normal?
    By wanderingturtle in forum GM EFI Systems
    Replies: 30
    Last Post: 05-06-2022, 10:13 AM
  2. 16144288 TBI ECM upgrade to 16168625 TBI PCM
    By 57 Handyman in forum GM EFI Systems
    Replies: 30
    Last Post: 01-11-2018, 03:21 AM
  3. Issue with ALDLDroid and 16168625
    By xSTUDDSx in forum GM EFI Systems
    Replies: 2
    Last Post: 01-18-2016, 08:15 PM
  4. 16168625 PCM Information $E6
    By EagleMark in forum GM ECM - Bins - TunerPro Definition Files - Wiring Diagrams - Tuner Info!
    Replies: 6
    Last Post: 03-13-2012, 04:51 AM
  5. Two 16197427 pcm's and one 16168625 pcm for sale.
    By JeepsAndGuns in forum Buy - Sell - Trade - Wanted
    Replies: 4
    Last Post: 02-08-2012, 02:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •