Hello

Been new to this forum, so pleas forgive my possibly stupid questions....

Some time ago, I changed my 3.1 v6 engine for a 3.4 (I know, is not a V8)
Sticked with the v6, because over here, it is not allowed to change the engine, and a 3.4 is almost the same (So nobody will see)

Leave the 1227730 inside, copied the AZTY bin to an empty chip.
Engine runs ok, a little rich, but lacks power above 3500rpm (I know, a V6 lacks power everywhere :p :p :p)

Ordered the Autoprom package from Moates, but seems like I cannot log any data....
Just get some non-logical data, like voltage 0.40v, rpm 200 rpm.....
Those data doesn't change with engine revs...

use the 88 mask and tunerpro rt v5

tried several other masks and bins, but seems like it stays the same....

anyone that can help me with tips (or maybe a bin for a 3.4 to start with)?

grtz, D