I have read a post on here about setting the mask ID to AA for disabling the checksum. The current bin file I'm working with does not show a mask ID anywhere under scalars or tables. I have a 1227165 ecm, the bin file is the 86TPI. I've tried the $32, $32b, and the 6E xdf. Any help would be greatly appreciated.
I don't have TP installed on this machine but MaskID is $32, $6E, etc. It's a scalar. Sometimes it's called calibrationID or promID although these are not technically correct. The location is usually at 0x0008 so you could define the value yourself or use the hex editor function of TunerPro to edit the value manually.
Ahhh.... OK ,it was just named differently. thanks for your help
OK I still must not have something right. As soon as I tried to disable the checksum, as described on a different thread, my cooling fan came on and my data log info started reading crazy.
Did you do that while emulating? Typically I set maskID to AA then save, then upload it to an emulator.
The man who says something is impossible, is usually interrupted by the man doing it.
It would not let me change it while emulating. I had to "release hardware", change the mask id then re-upload the file to the auto prom. That's when it started.
Posting Permissions
Reply With Quote
Bookmarks