Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Page 2 of 2 FirstFirst 12
Results 16 to 21 of 21

Thread: 5.7 vortec runs rich

  1. #16
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    3,301
    One option would be to read the Harris Memcal with a Moates.net Burn 2 - http://www.moates.net/burn2-chip-pro....html?cPath=94 and HDR1 Memcal Header - http://www.moates.net/hdr1-memcal-he....html?cPath=64

    See attached picture.

    Then you can load the .bin file read from the Harris Memcal into the Ostrich 2.0 with TunerPro RT.

    dave w
    Attached Images Attached Images

  2. #17
    Fuel Injected! jim_in_dorris's Avatar
    Join Date
    Dec 2011
    Posts
    768
    Dave, this may be one of the chips that Harris locked the BLM's on, he should probably start with a stock Bin and tune from there.
    Square body stepsides forever!!!

  3. #18
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    3,301
    Quote Originally Posted by jim_in_dorris View Post
    Dave, this may be one of the chips that Harris locked the BLM's on, he should probably start with a stock Bin and tune from there.
    I've fixed (re-tuned) my share of Harris Performance Chips over the years. I agree, start with a stock chip and tune with TunerPro RT from there...that's been my recipe for success. I can only wonder if Harris Performance used TunerPro RT, what would happen with his customer satisfaction %? In all fairness to Harris Performance, very few of his customers can or are willing figure out TunerPro RT.

    dave w

  4. #19
    Fuel Injected!
    Join Date
    Jan 2017
    Posts
    26
    Hey dave W, I loaded the bin you set me and it works better than the harris chip. Thank you for getting me into this, and for your help. I used the harris chip in the new run 1.xdlECU and it seems to be working. If I knew what I know now, I would have not bought that chip. I've been busy with work and haven't had time to learn more but, I'm looking forward to it. I attached a data log, thanks again

  5. #20
    Fuel Injected!
    Join Date
    Jan 2017
    Posts
    26
    Questions...I've been using a tablet with one usb port, and wondered if I can use a laptop to emulate and data log at the same time?
    Does the emulation need to be in progress to run the bin that it loaded onto ostrich 2?

  6. #21
    Fuel Injected!
    Join Date
    Jan 2017
    Posts
    26
    When I change the injector flow and save it, I unplug the computer from the ostrich, turn off the truck, then it goes into "limp mode"... why? I was able to get it working again by removing the G1 adapter, unplugging the memcal and plugging it directly into the ECM. What am I missing??

Similar Threads

  1. Replies: 14
    Last Post: 03-16-2016, 03:04 PM
  2. 350 Vortec wi th 454 TBI running pig rich
    By rsicard in forum GM EFI Systems
    Replies: 80
    Last Post: 08-07-2015, 05:55 PM
  3. Runs worse as it learns....
    By mikeames in forum GM EFI Systems
    Replies: 20
    Last Post: 06-18-2014, 07:59 PM
  4. truck runs for 30 sec then dies help!!!!!!
    By lilhupper in forum GM EFI Systems
    Replies: 47
    Last Post: 03-24-2013, 04:50 PM
  5. 165 ecm 5.0 runs best with MAF unplugged
    By jameslleary in forum GM EFI Systems
    Replies: 4
    Last Post: 03-22-2012, 07:49 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •