5.7 vortec runs rich

[dave w]

You have a Harris Performance Chip, not a stock chip.

The Ostrich 2.0 won't read the Memcal - Dang it, Dang it, and Dang it AGAIN!

I don't like the idea of you having to spend more money than you already have - Frustration, Frustration, and Frustration AGAIN.

Try loading the attached STOCK .bin file into the Ostrich 2.0 and post a data log.

dave w

[dhworkin]

Thank you Dave, and yes I'm spending way to much money. I have the original memcal but, I have larger cam and throttle body w/ egr delete. The Harris chip is a coustom chip and was stinking up the world. Is there another place I can get on from?

[dave w]

One option would be to read the Harris Memcal with a Moates.net Burn 2 - http://www.moates.net/burn2-chip-pro....html?cPath=94 and HDR1 Memcal Header - http://www.moates.net/hdr1-memcal-he....html?cPath=64

See attached picture.

Then you can load the .bin file read from the Harris Memcal into the Ostrich 2.0 with TunerPro RT.

dave w

[jim_in_dorris]

Dave, this may be one of the chips that Harris locked the BLM's on, he should probably start with a stock Bin and tune from there.

[dave w]

Dave, this may be one of the chips that Harris locked the BLM's on, he should probably start with a stock Bin and tune from there.

I've fixed (re-tuned) my share of Harris Performance Chips over the years. I agree, start with a stock chip and tune with TunerPro RT from there...that's been my recipe for success. I can only wonder if Harris Performance used TunerPro RT, what would happen with his customer satisfaction %? In all fairness to Harris Performance, very few of his customers can or are willing figure out TunerPro RT.

dave w

[dhworkin]

Hey dave W, I loaded the bin you set me and it works better than the harris chip. Thank you for getting me into this, and for your help. I used the harris chip in the new run 1.xdlECU and it seems to be working. If I knew what I know now, I would have not bought that chip. I've been busy with work and haven't had time to learn more but, I'm looking forward to it. I attached a data log, thanks again

[dhworkin]

Questions...I've been using a tablet with one usb port, and wondered if I can use a laptop to emulate and data log at the same time?
Does the emulation need to be in progress to run the bin that it loaded onto ostrich 2?

[dhworkin]

When I change the injector flow and save it, I unplug the computer from the ostrich, turn off the truck, then it goes into "limp mode"... why? I was able to get it working again by removing the G1 adapter, unplugging the memcal and plugging it directly into the ECM. What am I missing??