I don't know what I'm doing, but I'm gonna learn. I hooked everything up by following moates startup and truck want start. I thought I could plug in and start up then look at adjustments. How do I find the bin for the original memcal?
I don't know what I'm doing, but I'm gonna learn. I hooked everything up by following moates startup and truck want start. I thought I could plug in and start up then look at adjustments. How do I find the bin for the original memcal?
I am using a touch screen tablet and hit the emulate tab when I picked it up. Where do I go from here?
You have a Harris Performance Chip, not a stock chip.
The Ostrich 2.0 won't read the Memcal - Dang it, Dang it, and Dang it AGAIN!
I don't like the idea of you having to spend more money than you already have - Frustration, Frustration, and Frustration AGAIN.
Try loading the attached STOCK .bin file into the Ostrich 2.0 and post a data log.
dave w
Thank you Dave, and yes I'm spending way to much money. I have the original memcal but, I have larger cam and throttle body w/ egr delete. The Harris chip is a coustom chip and was stinking up the world. Is there another place I can get on from?
One option would be to read the Harris Memcal with a Moates.net Burn 2 - http://www.moates.net/burn2-chip-pro....html?cPath=94 and HDR1 Memcal Header - http://www.moates.net/hdr1-memcal-he....html?cPath=64
See attached picture.
Then you can load the .bin file read from the Harris Memcal into the Ostrich 2.0 with TunerPro RT.
dave w
Dave, this may be one of the chips that Harris locked the BLM's on, he should probably start with a stock Bin and tune from there.
Square body stepsides forever!!!
Questions...I've been using a tablet with one usb port, and wondered if I can use a laptop to emulate and data log at the same time?
Does the emulation need to be in progress to run the bin that it loaded onto ostrich 2?
When I change the injector flow and save it, I unplug the computer from the ostrich, turn off the truck, then it goes into "limp mode"... why? I was able to get it working again by removing the G1 adapter, unplugging the memcal and plugging it directly into the ECM. What am I missing??
Bookmarks