Results 1 to 14 of 14

Thread: A little stuck getting started

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Electronic Ignition!
    Join Date
    Mar 2017
    Posts
    10

    A little stuck getting started

    I have a '91 TBI 350 with the 1227747and ARJT chip that I am swapping into my '69 GMC. I have modified the harness (which is why I'm here LOL), and have tried to fire it up. The issue that I'm having is that I'm not getting an injector pulse. I know there are several posts about causes for that, and I've been through all of them and everything checks out. So, what I wanted to do is to hook up to the ECM to scan and see what I could be missing. I really need to figure out whether this is a wiring issue, or an ECM issue. My issue is that when I hook up to the ECM, I'm not getting any readings. Attached are a couple of screenshots of what I'm seeing (winALDL & putty). Just looking for some advice on what to check next.


    2017-03-18_1607.png
    2017-03-19_0726.png
    Last edited by mjensen; 03-19-2017 at 07:05 PM. Reason: fixed ECM model

Similar Threads

  1. Getting started
    By Shawn1989 in forum TunerPro Tuning Talk
    Replies: 15
    Last Post: 10-03-2016, 09:26 PM
  2. URGENT: Stuck in Limp Mode 536 miles from home!
    By wanderingturtle in forum GM EFI Systems
    Replies: 8
    Last Post: 08-02-2016, 08:40 AM
  3. Help Get me Started
    By edfiero1 in forum GM EFI Systems
    Replies: 4
    Last Post: 04-06-2015, 07:33 PM
  4. Stuck in HEX
    By TheApocalyptican in forum TunerPro Tuning Talk
    Replies: 1
    Last Post: 06-02-2012, 02:19 PM
  5. Westboro Finally getting it stuck to them. :D
    By Six_Shooter in forum Gear Heads
    Replies: 4
    Last Post: 04-23-2011, 01:44 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •