Results 1 to 5 of 5

Thread: 7427 $31 BPW constant address?

  1. #1
    Electronic Ignition!
    Join Date
    Oct 2015
    Posts
    17

    7427 $31 BPW constant address?

    Hello. It's been a while. I recently installed a cam, intake and long tubes in my truck (95 K2500 454). It runs amazing after a little tuning and now I want more of course. I've been sitting on a 4bbl TBI for a couple years and I want to install it. Aside from 1000 other complications I can't find the BPW constant for this bin anwhere in TunerPro. Or maybe I'm looking for the wrong thing? Most of my experience has been with the 7747 $42 mask and the EBL.

    Here's a pic of the throttle body. I'm kinda proud of it. A friend and I spent a weekend making it
    Attached Images Attached Images

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    The 7427 has an actual Injector Flow parameter and a Displacement parameter, instead of BPW.

    Nice work on the 4 BBL!

    dave w

  3. #3
    Electronic Ignition!
    Join Date
    Oct 2015
    Posts
    17
    Thanks! I'll have to look for that

  4. #4
    Electronic Ignition!
    Join Date
    Oct 2015
    Posts
    17
    Quote Originally Posted by dave w View Post
    The 7427 has an actual Injector Flow parameter and a Displacement parameter, instead of BPW.

    Nice work on the 4 BBL!

    dave w
    Ok I found them. The VE table only accepts numbers up to 100. If I needed to add more fuel would it be better to raise fuel pressure or fudge one of the "inj flow rate" or "cyl volume"? In the past I would have raised the BPW by a percentage then lowered the VE table by the same percentage to get the numbers less than 100.

  5. #5
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    If you need to add more fuel I think it's better to "decrease" the "injector flow rate in one lb increments" to achieve VE numbers less than 100.

    dave w

Similar Threads

  1. changing injector constant, and other newbie questions
    By dusterbd13 in forum GM EFI Systems
    Replies: 0
    Last Post: 03-03-2016, 04:35 AM
  2. Very high Constant Knock Retard (24*)
    By maples in forum GM EFI Systems
    Replies: 4
    Last Post: 08-30-2015, 02:48 AM
  3. 7.4L Injector #/hr constant in bin file
    By kevinvinv in forum GM EFI Systems
    Replies: 5
    Last Post: 09-15-2014, 01:39 PM
  4. 16 bit address bus on P4 ECM's
    By brian89gp in forum GM EFI Systems
    Replies: 15
    Last Post: 09-10-2013, 10:34 PM
  5. drive address & data bus with power off? C3 ecm
    By johnand1 in forum GM EFI Systems
    Replies: 1
    Last Post: 06-16-2013, 02:16 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •