Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 5 of 5

Thread: New member, Saskatchewan Canada

  1. #1
    Carb and Points!
    Join Date
    Mar 2017
    Posts
    3

    New member, Saskatchewan Canada

    Hi.

    New here, looking for all that good info you may need when reprogramming ECM's. Applications are usually engine transplants and today's subject is a 96 LT1.

    Thanks for any and all info!

    Ray

  2. #2
    Fuel Injected! steveo's Avatar
    Join Date
    Aug 2013
    Posts
    2,238
    welcome!

    auto or manual?

    iron or aluminum heads?

    if it's a manual, transpant a 94-95 ecm in it so you can use my stuff.........

  3. #3
    Carb and Points!
    Join Date
    Mar 2017
    Posts
    3
    4L60E and I believe iron heads. Donor was a 96 Caprice ex police car.

    I have some experience with Ford EECIV, both SD and MAF, this GM project is somewhat new to me although I did get a 3.8 V6 running in a Fiero for a friend previously. I have read about the 94/95 ECM's and the support on the pre OBDII applications is amazing compared to the similar generation Ford. Even the 4L60E may not be much of an obstacle, although the GM transmission management appears to be even more puzzling than Ford. Main goal is to turn off the post CAT O2 sensors as this project is a transplant into a 57 Chev. No VATS of any sort in the donor, although I recall using a 50 hz signal to fool the VATS in the Fiero project so many years ago. I'll post up questions in the appropriate forum as they happen and I'm going to search the extensive knowledge already here first.

    Thanks!

  4. #4
    Fuel Injected! steveo's Avatar
    Join Date
    Aug 2013
    Posts
    2,238
    will you buy tuning software? or...

    if you want to keep it stock-ish and just ditch the vats and rear o2s, there is this guy i know that will fix up your ecm for you

  5. #5
    Carb and Points!
    Join Date
    Mar 2017
    Posts
    3
    Yup, that is pretty much the plan and I still am considering a tuning software purchase. Donor was a 9C1 package with no VATS, but we will not be running cats and no need for the post cat O2 sensors. Would certainly like to get the PCM done, but I'm up in Saskatchewan Canada and shipping gets to be a problem. Got a line on some local support, but I'm going to try to learn the lingo a bit and that's why I'm here.

Similar Threads

  1. Hello from Saskatchewan, Canada
    By 66GP in forum Introductions
    Replies: 4
    Last Post: 09-18-2015, 01:17 PM
  2. New member from Canada
    By CocoFiero in forum Introductions
    Replies: 3
    Last Post: 09-11-2015, 01:00 PM
  3. New guy from Canada eh!
    By Z1LE in forum Introductions
    Replies: 1
    Last Post: 04-05-2013, 02:16 PM
  4. Hello from western Canada!
    By wolf87ca in forum Introductions
    Replies: 1
    Last Post: 04-15-2012, 03:42 AM
  5. Only in Canada you say?
    By convert2diesel in forum Introductions
    Replies: 8
    Last Post: 07-10-2011, 07:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •