Here's a log I took this morning. I'll make adjustments and burn a new chip when I get home tonight.
Capture.jpg
Here's a log I took this morning. I'll make adjustments and burn a new chip when I get home tonight.
Capture.jpg
Last edited by Chewy1576; 04-19-2017 at 09:15 PM.
1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10
Have decided to try the $OD MAF code.. Have all the parts to convert over and should have it all ready and installed within the week. I will be using the program to get the maf table in check. I will post my results as soon as I start. Thanks Steveo
Hi, could you define how the dictionary file works? I'm trying to filter out all instances of say acceleration enrichment or power enrichment. So in my case acceleration enrichment is defined by AE MAP, AE TPS. now of course because of ALDLdroid issues these are listed in columns that make no sense (error 45 and o2 sensor rich) so how do I go about setting up the dictionary file/filters to remove these records from the correction? here is a log example to show what i mean.
the dictionary has nothing to do with it, its only for autodetection. set up your own filters, its pretty easy...
This looks like a great tool but I must be doing something wrong - my output does not look right.
The Geometric view shows all “nan”.
If I use method: strict or loose some cells contain values. Empty cells say “nan” and there is no color coding.
I am using csv exported from TunerPro. I tried the csv file that Stokes1114 attached in post #147 and got the same result. I tried it on 2 different Windows 10 machines with the same result.
Thoughts?
Thanks,
Roger
At the lower left of the page that displays the table, note the display box. Click the drop down arrow and pick 0-255 (128=good). You will probably want to modify the display to match your VE table.
Bookmarks