Yes did VE tables first. Running in SDCL no MAF. I put different injectors in that I have more accurate info for so I decided to completely redo my VE tables. I have done about 4 or 5 logs with PE turned off to try to fine tune my VE tables with trimalyzer. The latest one I did was about a 90 min drive. Figured it was going to be as good as I could get it without a dyno so I was going to start dialing in the PE.

I just wasn't sure if I should worry about changing the VE table in the lower map regions where PE is active? It seems the changes to the PE AFR vs RPM table are consistent in the upper map regions but are showing rich in the lower map regions.

Here is a pic of my upper VE for reference. It has some hills and valleys, but the car seems to run real good.

2019-07 Upper VE.jpg