Narrowband Tuning Tool

[Chewy1576]

Here's a log I took this morning. I'll make adjustments and burn a new chip when I get home tonight.

Capture.jpg

[Stokes1114]

Have decided to try the $OD MAF code.. Have all the parts to convert over and should have it all ready and installed within the week. I will be using the program to get the maf table in check. I will post my results as soon as I start. Thanks Steveo

[maxpowerta]

Hi, could you define how the dictionary file works? I'm trying to filter out all instances of say acceleration enrichment or power enrichment. So in my case acceleration enrichment is defined by AE MAP, AE TPS. now of course because of ALDLdroid issues these are listed in columns that make no sense (error 45 and o2 sensor rich) so how do I go about setting up the dictionary file/filters to remove these records from the correction? here is a log example to show what i mean.

[steveo]

the dictionary has nothing to do with it, its only for autodetection. set up your own filters, its pretty easy...

[BlackZR1]

This looks like a great tool but I must be doing something wrong - my output does not look right.
The Geometric view shows all “nan”.
If I use method: strict or loose some cells contain values. Empty cells say “nan” and there is no color coding.
I am using csv exported from TunerPro. I tried the csv file that Stokes1114 attached in post #147 and got the same result. I tried it on 2 different Windows 10 machines with the same result.
Thoughts?

Thanks,
Roger

[Eds]

At the lower left of the page that displays the table, note the display box. Click the drop down arrow and pick 0-255 (128=good). You will probably want to modify the display to match your VE table.

[BlackZR1]

At the lower left of the page that displays the table, note the display box. Click the drop down arrow and pick 0-255 (128=good). You will probably want to modify the display to match your VE table.

Thanks for the reply Eds. I tried what you recommended but Geometric method still does not work and the Visual Analysis tab is blank as it was before. Empty cells read "nan" and no color coding.

Roger