Results 1 to 4 of 4

Thread: new member, 1990 GMC Jimmy full-size

  1. #1
    Carb and Points!
    Join Date
    Mar 2017
    Posts
    2

    new member, 1990 GMC Jimmy full-size

    Hello all, I just found this site and I hope it can help. I have a 1990 GMC Jimmy full-size that I am having problems with finishing it up. I followed ALL the recommendations from Brian at TBI chips. SO, I bought the 4 bolt vortec 350, lunati cam, etc.. It will not run. I can start it and once it goes from closed loop to open loop it seems to start flooding and dies. I also had some over heating issues with the stock thermostat so I dropped it to a 165. Anyways, I did go back to Brian about some help getting this sorted out and he is not able to help. If there a starting point to trouble shoot this thing, I sure would appreciate any help. Right now all I have is an expensive piece of yard art. Thanks, Dennis

  2. #2
    Fuel Injected! uncabob's Avatar
    Join Date
    Jan 2016
    Age
    86
    Posts
    121
    Hi Dennis:
    Welcome to the forum. I'd start by downloading Tunerpro. Info to do that is on the forum.
    Good luck:
    Bob
    Don't force it, get a bigger hammer!

  3. #3
    Carb and Points!
    Join Date
    Mar 2017
    Posts
    2
    Quote Originally Posted by uncabob View Post
    Hi Dennis:
    Welcome to the forum. I'd start by downloading Tunerpro. Info to do that is on the forum.
    Good luck:
    Bob
    Thanks Bob, I will do that. Is there someone that can burn a new chip if need be?

  4. #4
    Fuel Injected! uncabob's Avatar
    Join Date
    Jan 2016
    Age
    86
    Posts
    121
    Quote Originally Posted by Tumble511 View Post
    Thanks Bob, I will do that. Is there someone that can burn a new chip if need be?
    Dave W Is the one I would go to. He's on the forum and you can PM him.
    Bob
    Don't force it, get a bigger hammer!

Similar Threads

  1. E38 full flash using TC
    By Montecarlodrag in forum TunerCat OBDII
    Replies: 19
    Last Post: 03-22-2016, 06:28 AM
  2. 1994 GMC Jimmy 4.3l CPI
    By KC5UEA in forum Introductions
    Replies: 3
    Last Post: 12-10-2015, 01:41 AM
  3. 90 GMC Jimmy V1500, Conversion from TBI to MPFI
    By JimmyRon in forum GM EFI Systems
    Replies: 0
    Last Post: 10-17-2015, 08:27 PM
  4. No PE at full throttle...
    By Scrufdog in forum GM EFI Systems
    Replies: 2
    Last Post: 08-16-2014, 02:51 PM
  5. Screen Shots or placing full size photo in post.
    By EagleMark in forum GearHead EFI Forum Support
    Replies: 0
    Last Post: 12-24-2011, 08:09 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •