Results 1 to 2 of 2

Thread: Official Bro's 1992 FS Chebby Thread

  1. #1
    Fuel Injected!
    Join Date
    Jan 2017
    Posts
    411

    Official Bro's 1992 FS Chebby Thread

    Nutshell tired LO3 transplanted with a 350 .040, Vortec heads, L98 cam, 74# injectors, Edelbrock Performer intake, shorties and NV3500 approximately four weeks ago.
    Quote from my "Intro" thread...
    Quote Originally Posted by stew86MCSS396 View Post
    As stated above bro's truck is a 1992. Started just fine on the oem '299 computer but very rich. Swapped to '747 ecm w/ 5.7 manual truck bin EGR delete and changed BPC to 115 for 74# injectors. Much better smell at the exhaust. Didn't put a scanner on it and sent him home with that. I know, I know what am I waiting for. There's way more on the table since we're talking peanut cam vs. L98. He just notified me he had issues climbing a grade. My thoughts for hit it out of the ball park tune is to start with a L98 cam bin, however closest thing to that would be '746 Caprice cop car. Only wiring difference between the two, is the IAT/MAT sensor. Tried comparing the VE tables and very different. Internet searches had varying opinions of what the IAT does. Am I wrong to think I can import the '746 map into a '747 map? Another possible route is take the deleted EGR wiring repin A4 to C12 and run with the '746 sans EGR and BPC change. I know it still needs to be tweaked for the vortec heads but just wanted to kick some ideas around before the week ends and I won't see him til next week.
    Update...scratched the '746 idea although I'm open to comments about it. Turns out the climbing^^^ issues was all in the tune. Managed to get some data logs and corrected all the BLMs to 128+/-4. Also dumped first LT1 spark map I could find like copy and paste. Performance improved like night and day. Last data log after the LT1 spark map, BLMs varied as low as 110 to stoich. Bro is stoked with that tune but I know it's not perfect. He has a 2" TB in the mail and told me we'll take care of it then. It's been a very rewarding experience so far and thanx to all you experts that I've learned from!!! Stay tuned for the next update and the floor is open for comments.
    Last edited by stew86MCSS396; 11-10-2017 at 11:23 PM. Reason: Added info

  2. #2
    Fuel Injected!
    Join Date
    Jan 2017
    Posts
    411
    Within a few weeks of posting...bro put this Inject-it TBI adapter on top of the spread bore intake. We used a 2" Holley with OE BBC injector pod done in similar fashion,difference being the torx screws holding the pod down fit w/ no fuss and we used a modified wood prong t-nut for the air cleaner stud. Tuned the BLMs to 128+/-4 and that's about it. Haven't messed with PE yet. Seems to run fine for what was done so far. Bro is happy with the way it feels but I know there's more to be squeezed out it!!!

Similar Threads

  1. 1992-93 LT1 Thread
    By EagleMark in forum GM EFI Systems
    Replies: 2
    Last Post: 09-11-2020, 02:42 AM
  2. 1992 454 TBI Fuel Pressure HELP
    By Kaweh in forum Fuel Injection Writeups Articles and How to New and Old
    Replies: 9
    Last Post: 04-21-2017, 11:15 PM
  3. 1992 P30 7.4 / 4L80E M.H. Chassis
    By dktool in forum GM EFI Systems
    Replies: 48
    Last Post: 01-08-2017, 10:15 AM
  4. Replacement for 1992 Dodge PCM
    By doc65 in forum GM EFI Systems
    Replies: 4
    Last Post: 04-07-2015, 11:30 PM
  5. Still getting to know tunerpro. 1992 lt1 First data log
    By Leviathancj7 in forum TunerPro Tuning Talk
    Replies: 27
    Last Post: 09-29-2013, 01:43 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •