Thank you, Fast355

Ok so it looks like I need to use/find a knock sensor that is 4K Ohms and replace the older V8 10K Ohms Sensor and just leave the sensor that was in the back of the head disconnected. As far as finding the correct V8 memcal can I get that out of any V8 TBI computer or does it need to come from a 7427? As far as burning a new chip do you have any recommendations on programming hardware/software. Also since there are no known .bin files with a 5.7 and a manual tranny would starting from a 7.4 .bin with a manual tranny be a good option?