Need Xdf file for 03-05 Gm Truck

[PeteS]

I'm looking for an Xdf file that's compatible with any of the following Pcm's. If any one has a working Xdf for the blue/green pcm I'd kill for it. I'm not looking for any thing as extensive as the one's for the 0411 Pcm's just basics like VAT'S, injector flow rate, tach settings, gear ratio/speedo stuff and some trans parameters would be a great start. Even if I can't tune fuel and spark tables I'd at least be able to get the basics set so the pcm's were usable in swaps. If it's got more in it that's even betterSome Pcm numbers as examples#12576106#12586242#12589462#12602801#12589 462Thanks....I hope someone can help me on this

[LRT]

....

[PeteS]

A program & hardware I purchased from someone much smarter then I am. I'd rather not post the name of the program since it hasn't played nicely thus far with any of the american 03+ read or writes and I'm sure someone would run off to buy it with out understanding that right now it's not doing much for American stuff . It has been successful writing a full OS change and calibration changes from Holden bin files to a couple of GM pcm's but thus far it fails to complete a calibration write after writing a new bin to the pcm. It's got a lot of potential but I believe I'm the 1st person to try this on American GM pcm's....at least based on the amount of trouble I've had so far. With the limited use I've had trying this on 411 and 896 pcm's it does seem pretty stable and works well, managed to unlock an Hptuners tuned pcm in under 5 minuites, read the bin out of it then wrote a different OS back over it with no issues . Unfortunately I've got a stack of the 03+ pcm's so that aspect of it is doing me very little good at the moment.Once I hear back from the person that created this and get past the issues with the blue/green US bins I'd be more then happy to disclose all the details as well as my experiences with it.The reason I need a working ADX file to see what exactly is being changed in these Pcm's. It will write the bin but fails to do any thing else with out an error. I'd like to compare the values it shows as a Holden compared to what it shows after writting a GM bin.

[LRT]

....

[PeteS]

I'm from the good old US of A....but the tool did come from down under. Don't go running out to buy it just because of what I'm about to say..... but it's not actually $500 US dollars. Its 500AUD so depending on the conversion rate at the time the actual price will fluctuate. I want to say it was just under $400 US with shipping or pretty close to that amount.I didn't reference an OS number because right now I really don't care. I can flash an OS on the pcm that matches an XDF for what I'm trying to do right now. I keep getting errors with just about any US bin file. Hell I can read an 03+ pcm with this, and write the same file back to the pcm just fine but as soon as I try to "write cal" it fails about 1/2 way though. I'm thinking that when it writes the bin it's also writing every thing else it'd need to work but I don't have an 03+ engine here right now to try it on so with even a basic Xdf I can see if it's actually changing any thing. I've tried this in various combinations on 5 different Pcm's and all 5 end up with the same error unless you write a holden bin and cal file...then it works fine like the instructions say it should. And yes from what I've done with it so far it does work as advertised on the 99-02 pcm's. Took an 0411 out of a v6 jimmy and wrote an 01 silverado bin and cal right over it, have also tried the change pcm S/n and vin with it and that also works. I used it to clone another 0411 pcm I had out of a astro van into an 896 pcm for a 99 silverado. My friend took the pcm home and tried it with his HP tuners and it showed it was licensed as an 896(the only pcm he can tune on his unlimited license) when in fact it was an 0411...... and yes the pcm would start and run a vehicle. He hasn't tried to edit any thing in it, he just said it didn't ask him to license it like the 0411 normally would. Now back on track.....how about someones partial Xdf file so I can see how many of these pcm's I might have bricked trying this out lol.

[LRT]

....

[PeteS]

To quell any more questions about the 'How or why I need an XDF", here's vid of the 0411 I mentioned that was written to an 896 pcm, I just rolled it back 1 year further and from an Suv to a pickup. While doing this there was an OS mismatch but it wrote past it any ways with out an issue.....and works in vehicle. Notice at the end every thing changes even the Bcc and serial number in the pcm. If nothing else it's a way to get around licensing for Hptuners and EFI Live.....not that I would ever do that https://youtu.be/o_-O61bx1qA