Hey fellas, I am just getting started tuning my truck that I am doing some mods to..Looking for a bit of guidance. Particularly picking the correct bin and files for tunerpro rt. I have a 93 K1500, 5.7, 4L60e, 4.10 rear. Right now it is basically bolt on mods done so I would like to start as close to stock bin as possible. Im later adding a new roller cam, vortec heads and larger throttle body (I hope I can find one used). I have a 16168625 pcm. Ive bought an autoprom and its on the way so If all fails I will pull the bin from the stock chip.. If possible with my gp1 adapter? I see tons of bins and files on this site for my pcm, but get a bit lost in all the choices. Any help is appreciated!!