BDKA $E6 93 K1500 4L60e 5.7 Stock Bin.bin
Dave,
I received my hdr1 from moates and was able to pull my stock bin from my truck. Thought I would post it here since I didnt see it on the 16168625 file page.. just in case you want to add it.
BDKA $E6 93 K1500 4L60e 5.7 Stock Bin.bin
Dave,
I received my hdr1 from moates and was able to pull my stock bin from my truck. Thought I would post it here since I didnt see it on the 16168625 file page.. just in case you want to add it.
Thanks for the bin.. I was having same issues as you were locating a stock bin..
Homemade injector flow bench: https://www.youtube.com/watch?v=e_g9K0VEsfE
http://www.youtube.com/watch?v=zBYMtJO0pX8
I'm getting warmer.
1st things first. with a g1 adapter I need to have a chip with a bin on it because it seems impossible to get that config off that chip without removing it.. agree?
2. Followed directions withing tunerpro, they seem better than any vid ( at least for me) . UPLOAD button never lights up. So, does this ribbon cable need to be connected or can I can do it from my Lazboy?
and if the ribbon cable needs to be connected, how does the truck have anything to run off of?
I'm missing something or overthinking it.
My understanding is you have a APU1. Does your laptop detect APU1 hardware down at the bottom of TunerPro RT? You need to establish this connection by messing with the COM port on your laptop and preferences in TPRT. With the ribbon connected to G1 and G1 inserted into PCM, you should be able to load any bin into the emulator and the engine will be running off of the bin you just loaded to emulator.
http://support.moates.net/hdr1/
You can use some creativity if you don’t want to purchase a HDR1...
Last edited by stew86MCSS396; 03-30-2018 at 12:48 AM.
I wish they had of told me everything I needed... last week it was G1, now it's HDR1, whats next... I'll pay the money, that's not the issue, just tell me. ( Moates) not you.
Actually you don't need it if you can find the same bin or something similar to what you need at this link: http://www.gearhead-efi.com/Fuel-Inj...Information-0D
Just download and upload to emulator.
Bookmarks