I downloaded cd and got a com port 3 and I'm not sure where to go from here, still want find hardware on tunerpro rt. I'm running windows 8, could that be the problem?
I downloaded cd and got a com port 3 and I'm not sure where to go from here, still want find hardware on tunerpro rt. I'm running windows 8, could that be the problem?
Try this as windows 8 is not the problem. Open TunerPro, Tools, Preferences, Data Act./Emulation tab and key on Configure Plug-in Component and set to comport 3 as you noted.
I was able to change from com1 to com 3 but no hardware found. I checked and cable was found and functional.
Still not connecting but I'm getting close. Could it be the wiring in the truck or the chip has a block on it?
I haven't been able to get Turner Pro RT to connect and have spent hours trying to, watching videos and asking help on forums, I feel like I've been lead in the wrong direction and left out to dry.
Hey DH :-)Originally Posted by dhworkin
Hate to see anyone get discouraged on this. I'm pretty green too. But there are a few things here that I'm not following.
What ECM,
what hardware,
what XDF are you using?
Did you download the set-up Dave suggested in post 5? I've had to run set-up several times and just keep it in my tool bar.
It's too soon to give up.
Bob
Don't force it, get a bigger hammer!
Did you download the cable driver???
What .adx file are you using??? dave w
Thank you for the help, I had to take a break and educate myself a lot more before attempting to connect. Now that I can connect to tunerpro rt I'm ready for the next learning curve. I'm going to try and record a data log today, which I think is the next step. The ADX file that I am using is $31, is this ok for my setup with the mod's that I have? Or does it matter? My goal is to get the fuel corrected and get better mileage.
Posting Permissions
Reply With Quote
Bookmarks